DIY Drink Bottle Name Sticker

This listing covers a standard name sticker (adhesive vinyl) for a drink bottle, measuring up to 15cm in length. 

The sticker can be in any colour, please advise at time of ordering. Choose from one of the fonts (see pictures).

 ADHESIVE VINYL APPLICATION INSTRUCTIONS

1. Always apply adhesive vinyl to clean, dust-free surface
2. Cover name with clear transfer tape and scrape down with a credit card/ruler edge
3. Turn name over and scrape white backing material with credit card as well.
4. Remove white backing material, peeling slowly from one corner. If the name is not sticking to the clear transfer tape then repeat the scraping process on both sides.
5. Once white backing material has been removed, you are ready to place your name on the desired surface.
6. Once the correct position has been selected, press the name down onto the bottle to tack in place.
7. Use credit card to scrape onto the bottle, or rub firmly with fingers
8. Slowly peel clear transfer tape off from one corner, making sure the name is sticking to the board.
9. If it starts to lift a little bit when removing the clear transfer tape, press down on the letters to hold in place and gently rub to adhere
10. If the name is not sticking at all, clean bottle again and allow to dry before repeating steps 6-9 as needed.

**Important note**

After adding this item to your shopping cart, please click on "Personalise Your Products" and enter the name , colour and font style you would like personalised on your new name sticker!! Please note that if you are ordering more than one personalised item, all of these details need to be entered into the same box.

Please ensure spelling and design details are correct when adding to your cart as this will be the final step before design and production occur.